2022 Link Pipe

[Mtnbkr]

Has anyone had any luck with fabricating a custom oval link pipe for a 2022? Seems like it would be doable, before I go to an exhaust fabricator thought I would ask. Thanks

 

[Max Kool]

@tk-funsport from Germany makes two models. Still requries you to cut and weld.

 

[tk-funsport]

Hi at all, here is my elbow decat linkpipe for 22 models. I have also a stright one in program.
Both are available with or without a small cat inside.
Prices are from 180.-€ up to 460.-€ plus shipping. I'm located in Germany, shipping to Us is no prob.

 

[pushit]

Hi at all, here is my elbow decat linkpipe for 22 models. I have also a stright one in program.
Both are available with or without a small cat inside.
Prices are from 180.-€ up to 460.-€ plus shipping. I'm located in Germany, shipping to Us is no prob.

any plans on doing a full exhaust, or at least from the cylinder heads to your link pipe but no muffler (so we can reuse ours)

 

[tk-funsport]

I'm thinking about that. But have lots of other work. Time is the problem

 

[pushit]

I'm thinking about that. But have lots of other work. Time is the problem

I have $$ money ready to throw at you whenever you're ready.
I'd think you would sell a lot of them

 

[DAX]

Has anyone had any luck with fabricating a custom oval link pipe for a 2022? Seems like it would be doable, before I go to an exhaust fabricator thought I would ask. Thanks

Hello
I bought 2021 headers and had the rear header pipe cut to match the curve of my 2022 carbon then remapped.
Mike.

 

[Mtnbkr]

Looks great, so where did you get the 2021 header? Did you go thru the dealer or find one used? Thanks for the idea, another way to fix the problem Indian created!!

 

[DAX]

Hello
Yes i was lucky that a dealer that does tuning work had a set ( Moorespeed in Poole UK )
Regards.
Mike.

 

[Mtnbkr]

That’s great, I appreciate the idea. Looks good and I’m sure it sounds and runs good!!

 

[ferraiolo1]

You do loose a good bit of right lean angle putting the 2019 header on the bike if you like to ride hard

 

[Mtnbkr]

Thanks, good information. I won’t be foot peg dragging the FTR, if anything, I might bottom it out on some dirt. My main reason for exhaust upgrade is to decat, trim some weight, fit some baggage on the bike. Thanks again.

 

[czmx]

Hello
I bought 2021 headers and had the rear header pipe cut to match the curve of my 2022 carbon then remapped.
Mike.

What specifically did you have to cut on the '21 header to make it fit your '22 FTR? Thanks.

 

[czmx]

I have $$ money ready to throw at you whenever you're ready.
I'd think you would sell a lot of them

Me too!

 

[tk-funsport]

Some oval decat pipes in stock, from 180.-€ up to 460.-€, depends which one you want.

 

[czmx]

Some oval decat pipes in stock, from 180.-€ up to 460.-€, depends which one you want.

Hi TK, When you have the shorter, straight-ish (not the U-shaped) decat pipes ready for the 2022 Carbon R, please let me know. Thanks!

 

[tk-funsport]

Hi, have it in stock! 180.-€ without cat, 320.-€ with small cat, plus 25.- shipping to Us.

 

[czmx]

Hi, have it in stock! 180.-€ without cat, 320.-€ with small cat, plus 25.- shipping to Us.

OK. I prefer the non-cat version (I think...) I'll research that and get back to you first of next week. Thanks.

 

[Streetbob Duran]

Hey @tk-funsport do you provide a template or something so i know where to cut with your decat pipes? I have a '23 rally that i want to put on a slip on. Also how much would a basic pipe w/no cat cost me?

 

[Bomverh69]

Hey Tk, do you provide a template or something so i know where to cut with your decat pipes? I have a '23 rally that i want to put on a slip on. Also how much would a basic pipe w/no cat cost me?

Good question, i bought the S&S slip on but now think i should have taken the cat off. mine is also a 22 so would need to cut the pipe.