JonM
New member
Hello folks. 2019 Indian FTR1200S. Took the bike out for a 5-6 minute warmup and ride to get it warmed up to change the oil. Brought the bike in garage, shut it off and proceeded with the oil change. Took maybe 30-45 minutes as it was my first time doing it. Went very smoothly until I went to fire the bike up after filling it with the necessary oil amount. Nothing. No screen, no click, nothing at all. Even tried using the spare key. Put on trickle charger and it just flashes red so it’s not charging. Pulled the fuses, swapped a couple around to see if that would work. Can’t tell if the large square ones are blown or not.
Im just baffled how it worked perfectly fine and then absolutely nothing. I feel likes it’s a main fuse ( since there’s nothing at the key/ignition ) but I can’t figure out from the manual which one that is or if it’s blown or not.
Im just baffled how it worked perfectly fine and then absolutely nothing. I feel likes it’s a main fuse ( since there’s nothing at the key/ignition ) but I can’t figure out from the manual which one that is or if it’s blown or not.