Rizoma indicators

[edgelett]

This is from the instruction manual. Keep in mind that's using the mounting kit for a licence plate that has no holes on the side, but it shows how they bolt on.

 

[khjm78]

when I get home I'll see what I can get photos of. don't want to unbolt them lol

Awesome! Thanks!

 

[khjm78]

This is from the instruction manual. Keep in mind that's using the mounting kit for a licence plate that has no holes on the side, but it shows how they bolt on.

View attachment 6061

Understood. Thanks!

 

[edgelett]

Here you go.

looking at my tail tidy, and going from memory, I'm using a different hole to the one for stock indicators. slightly smaller.

 

[khjm78]

Thanks. I bought this as well. https://www.rizoma.com/en/fr435.html
Hopefully it will fit in nicely to the holes for the stock indicator.

 

[khjm78]

hey edgelett, received the rizoma indicators today. Which schema should i use 2 or 3? Thanks!

 

[edgelett]

hey edgelett, received the rizoma indicators today. Which schema should i use 2 or 3? Thanks

Which model Rizoma indicators did you get?
I got the Leggara ones, the instructions are very clear that particular model uses Schema 4, and that's what I used for mine.
Check the instructions for the model you purchased.

 

[khjm78]

Which model Rizoma indicators did you get?
I got the Leggara ones, the instructions are very clear that particular model uses Schema 4, and that's what I used for mine.
Check the instructions for the model you purchased.

View attachment 6180

Thanks for the information. I bought the Leggara as well.

 

[edgelett]

Thanks for the information. I bought the Leggara as well.

No worries!
Definitely use Schema 4, should be just one of the two resistors supplied in your wiring chain.
It was initially confusing as they supply 2 per indicator, but they supply 2 because they could fit a big range of bikes.
Schema 4, with one resistor, is what you need per indicator

 

[khjm78]

No worries!
Definitely use Schema 4, should be just one of the two resistors supplied in your wiring chain.
It was initially confusing as they supply 2 per indicator, but they supply 2 because they could fit a big range of bikes.
Schema 4, with one resistor, is what you need per indicator

Perfect! You answered another question i had in my head on the two resistors. Thanks! 😄

 

[edgelett]

haha any time