According to my tech the '22 side stand will not fit the '19 model.
ferraiolo1 2021-2024 IMR Ambassador Staff member Jul 28, 2021 #2 It fits. But it’s 2in shorter. Too short if you only lowered your bike an inch or so
N nnm505 Member Jul 28, 2021 #3 Tech says the stop on the upper end is too short. Installed the Hypertech kit.
ferraiolo1 2021-2024 IMR Ambassador Staff member Jul 28, 2021 #5 You will need to cut/weld your stand for that kit
edgelett Well-known member Jul 28, 2021 #7 nnm505 said: That's the plan now. Click to expand... it's a pretty simple job. i took 15mm out (well...my boyfriend did) based on some suggestions from others. I recommend taking 20mm out.
nnm505 said: That's the plan now. Click to expand... it's a pretty simple job. i took 15mm out (well...my boyfriend did) based on some suggestions from others. I recommend taking 20mm out.
edgelett Well-known member Jul 28, 2021 #9 nnm505 said: Thanks, I was thinking of an inch. Click to expand... with the lowering kit that;'s probably about right
nnm505 said: Thanks, I was thinking of an inch. Click to expand... with the lowering kit that;'s probably about right