I made it work! I was going to cut that arm off that mounts to rear peg, but wanted to keep in case I ever want to take rear rack off and just use side SLC rack.I have the same issue. I’m considering sawing off the mounting plate and repositioning it to attach to the accessory bracket.
Just have to make sure you want the passenger peg up or down when installing as again, that arm will brace against it.Thanks for posting the pics. I may have to try it out before making any cuts. Which bag did you get for it?
After some cutting and welding, I was able to make the SW-Motech side rack fit perfectly with the rear rack.Just have to make sure you want the passenger peg up or down when installing as again, that arm will brace against it.
If closed, the arm actually kind of sits in the rear peg.
I didn't get a bag yet as wanted to test bracket first but now that I've fit it,, going either Urban ABS or the Legend all black bag....can't decide
Thats awesome...no welding experience here. I ended up just cutting the arm off and is plenty sturdy without it.After some cutting and welding, I was able to make the SW-Motech side rack fit perfectly with the rear rack.
Yeah, before i cut mine off, that arm was not attached or touching anything, i put all my weight on it, ect and was solid. Figure with my bag its not going to have a ton of weight anyway and decided to cut it. Looks good, works great and the sw sys bag 15 is a perfect size.I probably should’ve done the same. It took a lot more time than it was worth. My welds looked like fried popcorn, so I spent a few hours smoothing it out.
BTW what pegs are those? look goodAfter some cutting and welding, I was able to make the SW-Motech side rack fit perfectly with the rear rack.