Recent content by bbuettner

When I first tried to do it with the plunger attached, I thought "This is impossible! #$@*!" Glad my experience could help someone else.

Mine works, but it is a pain to fiddle with it on every fill up. I would but a non-locking one in a minute, if one was available.

I would be happy if I could just find a keyless gas cap to replace the fiddly stock one!

I pulled the plunger out of it's holder, put it on the lever peg, and then held the lever while I snapped it back in it's perch. Took 2 minutes.

Triumph Speed Twin I traded in a Kawasaki Z900RS (see avatar) and was looking for something with more character and not an inline 4.

If it was just "runs poorly when cold", I would have been OK with that. Mine stalled 2 or 3 three times on every cold start - unacceptable!

I'm in the USA and bought a new 2019 FTR S this spring. It had the AH2 update already installed. It stalled several times on every cold start and ran like crap until it warmed up. I added a S&S slip on exhaust, cat delete pipe, and a FuelMoto/PV3 tune. It now starts right up and runs great...

I am using the PV3 w/FM tune and decat/slip on. I had flame outs when I pulled the clutch in on my first two rides. Many rides since then (over 1,000 miles) no issues.

Super exciting race. The gang that pulled off late for rain tires kinda got screwed. I guess you make your decisions and live with them!

Have you tried Sport mode?

Very cool!

Thanks! I just didn't want to screw things up and leave my bike unrideable! :oops:

So I went to install my Raximo levers this Saturday and... 1. Brake lever - old one came off in just a minute, but you need to move the plunger from the old lever to the new lever. The plunger is captured in the old lever and I could not figure out how to remove it. Do I need to press out the...

1. I am running the stock mirrors, so no help here. There are many others who can chime in on mirrors 2. I'm 6'0" and I'm flat footed on stock 2019 RR. But there are seat options from Corbin and Saddleman and they will make custom to your spec. 3. I used a Corbin fender eliminator and am...

Welcome from Michigan!