mark.lb
Well-known member
I own two Indian motorcycles (FTR and Vintage). Both come from the factory (in the USA) with a SAE connector that allows easy attachment of a battery charger/tender or a port to plug in accessories.
First the FTR:
As you can see the polarity of the connector is clearly indicated on the FTR but no colored wires are visible.
The same is not true on the Chief Vintage:As you can see the polarity is not stamped into the connector and the positive side has a female pin attached to a white wire with a red stripe.
However: On both bikes the positive side is a female pin on the SAE connector attached to the bike. I hope this is helpful.
First the FTR:
As you can see the polarity of the connector is clearly indicated on the FTR but no colored wires are visible.
The same is not true on the Chief Vintage:As you can see the polarity is not stamped into the connector and the positive side has a female pin attached to a white wire with a red stripe.
However: On both bikes the positive side is a female pin on the SAE connector attached to the bike. I hope this is helpful.